Replacing The Fan On The Control Supply Module - Siemens Sinamics S120 Manual

14.2.4

Replacing the fan on the Control Supply Module

Replacement fan (Order. No. 6SL3160-0AB00-0AA0)
Danger of death when live parts with several supply circuits are touched
Death or serious injury can result when live parts are touched.
• Switch off all of the supply circuits before you start any work.
Table 14- 8 Removing the fan
Remove the component from the drive line-up.
•
Remove the 6 screws (Torx T10) from the enclosure cover and open the component.
•
Release and withdraw the
•
connector.
Booksize Power Units
Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6
WARNING
Release the 2 screws on the fan
•
(Torx T20).
Service and Support Booksize
14.2 Replacing the fan
Remove the fan.
•
819