Installation
1. Insert the DRIVE-CLiQ cabinet bushing through the opening in the cabinet.
2. Fasten the DRIVE-CLiQ cabinet bushing using the associated O ring with a tightening
①
Flange, SW18
②
Seal
③
Cabinet panel
④
O ring, SW20, tightening torque: 3 to 4 Nm
Figure 11-39 Mounting DRIVE-CLiQ cabinet bushings for cables with M12 connectors
11.6.5
Technical data
Table 11- 26 Technical data of DRIVE-CLiQ cabinet bushings
Weight
Degree of protection
according to
EN 60529
Booksize Power Units
Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6
torque of 3 to 4 Nm
Unit
kg
11.6 DRIVE-CLiQ cabinet bushings
6SL3066-2DA00-0AA0
DRIVE-CLiQ
0.165
IP54 outside the control cabinet
IP20 or IPXXB inside the
control cabinet
Accessories
6FX2003-0DT67
M12
0.035
IP67
685