Siemens Sinamics S120 Manual page 752

Booksize power units

Hide thumbs Also See for Sinamics S120:

Table of Contents

Cabinet design and EMC Booksize

12.8 Connection systems

Table 12- 26 Possible installations of the shield plate

Shield plate supplied for the motor connector

Lateral alignment of the shield plate

Mount the shield plate with the recesses facing upwards. Otherwise the shield plate will not be able to be tightened. It is

then no longer guaranteed that the shield plate is mounted so that there is a reliable electrical connection.

The shield plate can be mounted at various angles at the motor connector using two screws

(M4) that are provided (tightening torque: 1.8 Nm).

In order to guarantee that the cable shield is connected through a large surface area, the

motor power cable is attached with a steel hose clamp at the shield plate.

Frontal alignment of the shield plate

Lateral alignment of the shield plate

Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6

Booksize Power Units