Motor Modules With Cold Plate; Description - Siemens Sinamics S120 Manual

Booksize power units

Hide thumbs Also See for Sinamics S120:

Table of Contents

Motor Modules with cold plate

A Motor Module is a power unit (inverter) that provides the power for the connected motors.

Power is supplied by the DC link of the drive unit. A Motor Module must be connected to a

Control Unit via DRIVE-CLiQ. The open-loop and closed-loop control functions for the Motor

Module are stored in the Control Unit.

One motor can be connected to Single Motor Modules and 2 motors can be connected to

Double Motor Modules.

Danger to life if the fundamental safety instructions and remaining risks are not carefully

If the fundamental safety instructions and remaining risks in Chapter 1 (Page 25) are not

observed, accidents involving severe injuries or death may occur.

• Adhere to the fundamental safety instructions.

• When assessing the risk, take into account residual risks.

Booksize Power Units

Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6

Motor Modules Booksize

6.4 Motor Modules with cold plate