Accessories
11.1 Shield connecting plates for power supply and motor cables
11.1.5
Installation
Tools required:
● Torx screwdriver T25 for shield connecting plate
Table 11- 5
Installing the shield connecting plate to a 100 mm wide component using as an example, internal air cooling
Remove the screw.
Tools required:
● Screwdriver for fixing screws used
640
Engage the shield
connecting plate.
Tighten the shield
connecting plate.
Tightening torque: 3 Nm
Manual, (GH2), 04/2014, 6SL3097-4AC00-0BP6
Installed shield connecting
plate
Booksize Power Units