Table of Contents
Advertisement
How to configure the instrument
Install the software license
upgrade
76
Perform the following procedure to install the software license upgrade:
1. On the PRISM monitor, open the Settings > Network menu page to view the
Control IP Port address of the instrument which you are going to upgrade.
2. Copy the software license upgrade file you downloaded to a location on the
hard drive of your computer.
3. On your computer, enter the following in the URL box of your web browser,
where xxx.xxx.xxx.xxx is the IP address of the Control IP Port of the
instrument you are upgrading. The IP address is case sensitive.
http://xxx.xxx.xxx.xxx:9000/licensePortal.html
4. This opens the Tektronix PRISM License Installation Web page as shown
below. The Web page shows the Host ID (a string that uniquely identifies the
instrument) and the instrument serial number.
Figure 55: PRISM License Installation Web page – initial view
PRISM Media Analysis Platform User Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the PRISM and is the answer not in the manual?
Questions and answers