Figure 7: Mpi Power/Standby Button - Tektronix PRISM User Manual

MPI power-off procedure
PRISM Media Analysis Platform User Manual

Figure 7: MPI Power/Standby button

1. Press the Power/Standby button on the instrument front panel to turn the
instrument off.
CAUTION. To prevent data loss, it is strongly recommended that you first shut
down the instrument using the power button or the Settings > Utilities > Power
submenu before disconnecting the power cord.
To minimize the risk of damage to the instrument, it is strongly recommended that
the AC adapter be disconnected from the AC power source before the adapter
is disconnected from the instrument.
2. To completely remove power from the MPI monitor, disconnect the power
cord from the instrument. (See page 14, MPI power cord removal.)
Getting started
15