Remote Control Via Api Commands; Figure 22: Api Documentation Web Page - Tektronix PRISM User Manual

Remote control via API commands

Figure 22: API documentation web page

PRISM Media Analysis Platform User Manual
The PRISM monitor has a limited command set for controlling the instrument
using REST-style API commands. You can use GET and POST commands to
configure the signal inputs and to select the active input.
Use the following steps to access the API documentation:
1. On the PRISM monitor, open the Settings > Network page to view the
Control IP Port address of the instrument to which you are going to connect.
2. On your computer, enter the following in the URL box of your web browser,
where xxx.xxx.xxx.xxx is the IP address of the Control IP Port of the
instrument.
http://xxx.xxx.xxx.xxx:9000/api/help
3. This opens a PRISM API Documentation Web page as shown below.
Methods of operation
39