How To Set The Time And Date - Tektronix PRISM User Manual

How to set the time and date

PRISM Media Analysis Platform User Manual
Perform the following steps to set the internal time and date used by the instrument
to record events.
NOTE.
When the time and date settings are changed, the instrument must be
rebooted to implement the changes.
1. Touch the Settings icon (
2. Select Utilities to open the Utilities submenu.
3. Select Time and Date to open the submenu shown below. The submenu has
two tabs: TIME AND DATE and TIME ZONE.
WARNING. Excess time changes can cause the loss of all license files. If the
instrument license files are lost servicing will be required. Time should only be
changed less than ± 1 hour at a time. Use the TIME ZONE tab to set the local
time to prevent excess time changes.
4. Touch TIME ZONE to open the submenu shown below.
Figure 49: Time Zone submenu
5. Use the Time Zone drop-down list to select the correct time zone offset for
your location. The selection names include the time offset from UTC and also
major cities within those time zones.
6. In the TIME AND DATE tab, adjust the time and date using the up and down
arrows to adjust each parameter as needed. The time setting uses a 24 hour
clock, so no AM/PM setting is required.
How to configure the instrument
) to open the Settings menu.
69