St. Bpm Mod. Delay (Stereo Bpm Modulation Delay) - Korg KROSS Parameter Manual

Effect Guide
102: St. BPM Mod. Delay (Stereo BPM
Modulation Delay)
This is a stereo modulation delay that lets you synchronize the
delay time to the tempo of the song.
Stereo In - Stereo Out
Left
Right
Tempo
BPM
Base Note x Times
BPM
Base Note x Times
D -mod
Response
LFO: Tri / Sine LFO Shape
LFO Sync
Paramter
ΒΠΜ
Delay BPM
L Delay
T.OverL?
Time Over?
R Delay
T.OverR?
Time Over?
L Dly Note Base Note
Times L Times
Feedbck L Feedback
R Delay Base
R Dly Note
Note
Times R Times
Feedbck R Feedback
←
L Depth
LFO Phase
←
[deg]
←
R Depth
R LFO Phase
←
[deg]
Modulation
Mode Mode
Mode
Dmod
Dmod Mod
Modulation
Src Source
Resp Response
274
Delay
Feedback
Delay
D-mod
L/R: +/+ +/–
LFO
LFO Phase Modulation Mode
Value Explanation
MIDI syncs to the
MIDI, system tempo; 40–
40.00... 300 sets the tempo
300.00 manually for this
individual effect p.272
Display the error
message if the left
---, OVER! channel delay time
exceeds the upper
limit p.275
Display the error
message if the right
---, OVER! channel delay time
exceeds the upper
limit p.275
Selects the type of
notes to specify the
... 3
left channel delay
time p.272
Sets the number of
notes to specify the
x1...x32
left channel delay
time p.272
Sets the feedback
–100...+100
amount of left delay
Selects the type of
notes to specify the
... 3
right channel delay
time p.272
Sets the number of
notes to specify the
x1...x32
right channel delay
time p.272
Sets the feedback
–100...+100
amount of right delay
Sets the depth of the
0...200
left LFO modulation
Sets the phase
–180...+180 obtained when the
left LFO is reset p.268
Sets the depth of the
0...200
right LFO modulation
Sets the phase
obtained when the
–180...+180
right LFO is reset
p.268
Switches between
LFO modulation
LFO, Dmod control and
modulation source
control
Reversed L/R control
L/R:+/+,
by modulation source
L/R:+/–
p.268
Selects the
modulation source
Off...Tempo
that controls delay
time
Sets the rate of
0...30 response to the
modulation source
LFO
LFO
Waveform
←
LFO Shape
LFO Freq
LFO [Hz]
[Hz]
LFO Dmod
Sync
Sync
Wet / Dry Src Source
BPM/MIDI
MIDI Sync
Sync
Wet / Dry
←
BPM
←
Base Note
←
Times
←
Wet/Dry
Src Source
Amt Amount
Time Over? L, R
You can set the delay time up to 2,550 msec. If the delay time
exceeds this limit, the error message "OVER!" appears in the
display. Set the delay time parameters so that this message will not
appear. "Time Over?" is only a display parameter.
103: St.BPMAutoPanDly (Stereo
BPM Auto Panning Delay)
This stereo auto panning delay enables you to set the delay time to
match the song tempo.
Stereo In - Stereo Out
Left
Right
Tempo
BPM
Base Note x Times
BPM
Base Note x Times
LFO: Tri / Sin
Paramter
ΒΠΜ
Delay BPM
L Delay
TimeOverL?
Time Over?
R Delay
TimeOverR?
Time Over?
Tri (Triangle), Selects the LFO
Sine Waveform
Changes the
–100...+100 curvature of the LFO
Waveform
Sets the speed of the
0.02...20.00
LFO
Switches LFO reset
Off, On
off/on
Selects the
Off...Tempo modulation source
that resets the LFO
When this is on, the
LFO speed is set by
BPM, Base Note, and
Off, On
Times, instead of
Frequency
MIDI syncs to the
MIDI, system tempo; 40–
40.00... 300 sets the tempo
300.00 manually for this
individual effect p.223
Selects the type of
... 3
notes that specify the
LFO speed
Sets the number of
x1...x32 notes that specify the
LFO speed
Sets the balance
–Wet...
between the effect
–99 : 1, Dry,
and the dry input
99 : 1...Wet
Selects a modulation
Off...Tempo
source for Wet/Dry
Sets the modulation
–100...+100
amount for Wet/Dry
High Damp Low Damp
Pan
Delay
Feedback
Delay Pan
High Damp Low Damp
LFO Phase
LFO Shape
Value Explanation
MIDI syncs to the
MIDI, system tempo; 40–
40.00... 300 sets the tempo
300.00 manually for this
individual effect p.272
Display the error
message if the left
---, OVER! channel delay time
exceeds the upper
limit
Display the error
message if the right
---, OVER! channel delay time
exceeds the upper
limit
p.224
p.226
p.268
p.223
p.223
p.223
p.226
Wet / Dry
Depth
Wet / Dry
p.273
p.273