Korg KROSS Parameter Manual page 153

Repeat Measure
Repeat Measure is available on S–TRACK EDIT page.
This command repeatedly inserts the specified measures for the
specified number of times.
When you execute the Repeat Measure command, the measures
will be inserted following the measure specified by To End of
Measure, and musical data following the inserted data will be
moved backward. It is convenient to use this command when you
have a song that you play back with Track Play Loop (S–LOOP/
TONE> LOOP) turned on, and wish to expand it into musical data.
1. Use Track Select to choose the MIDI track (Track 01–16)
that you want to insert data into.
2. Select "Repeat Measure" to open the dialog box.
3. In From Measure and To End of Measure, specify the range
of measures that will be repeated.
(By default, From Measure and To End of Measure will be set to
the range you specified in the Track Edit page.)
4. In Times, specify the number of repetitions.
For example if you set From Measure to 001, To End of
Measure to 004, and Times to 2, the musical data of measures 1–4
will be inserted into measures 5–8. The result will be that
measures 1–4 will be played twice.
5. Specify the track(s) where you want to execute the com-
mand.
If you execute with All Tracks unchecked, the performance data
will be inserted into the track you specified in Track Select. Be
aware that in this case, the performance data following the insert
position will move backward (i.e., toward the end of the song) by
the number of inserted measures, but the time signature and tempo
will not move.
If you execute with All Tracks checked, the performance data will
be inserted into all tracks, including the tempo track. The
performance data following the inserted measures will play back
in the same way as it did before.
If you execute the Repeat Measure operation on measures 1–4 with "Time" = 2,
measures 1–4 will be inserted into measures 5–8.
Before
Repeat
Track 1 1 2 3
Measure
After
Repeat
Track 1 1 2 3
Measure
4 5 6
4 1 2 3 4 5 6
Sequencer: FUNCTION Repeat Measure
Copy Measure
Copy Measure is available on S–TRACK EDIT page.
This command copies the measures of musical data specified as
the From source to the beginning of the measure specified as the
To location.
When you execute the Copy Measure command, the existing track
data at the copy destination will be rewritten.
1. Select the copy source song.
2. Select "Copy Measure" to open the dialog box.
3. In From: Track select the copy source track.
(By default, this will be the track you selected in Track Select.)
If you execute with All Tracks unchecked, only the selected track
will be copied. Note that the time signature and tempo will not be
copied.
If you check All Tracks, the musical data of all tracks including
the tempo track will be copied.
4. In From Measure and To End of Measure, specify the range
of copy source measures.
(By default, From Measure and To End of Measure will be the
range that you specified in the Track Edit page.)
5. Use To: "Song" to specify the copy-destination song,
"Track" (if All Tracks is unchecked) to specify the copy-
destination track, and Measure to specify the starting mea-
sure where the copied data will be inserted.
Example: When you copy measures 5–7 of track 1 to the third measure of track 2,
measures 3–5 of track 2 will be rewritten.
Track 1
1 (4/4) 2 (4/4) 3 (4/4)
(source)
Track 2
1 (4/4) 2 (4/4) 3 (4/4)
(destination)
4 (3/4) 5 (3/4) 6 (3/4) 7 (4/4)
4 (3/4) 5 (3/4) 6 (3/4) 7 (4/4)
145