Mixer - Korg KROSS Parameter Manual

Sequencer mode
10–4: MIXER
Pan
1...5 (IFX 1...5)
Pan
Bus Select
Send1
Send2
FX Control Bus
These settings are the same as for a program.
See "16–4: MIXER" on page 61
10–1...4: FUNCTION
• 0: Memory Status
• 1: Solo Setting see page 63
• 2: Undo see page 137
• 3: Create New Song
• 4: Rename Song see page 137
• 5: Delete Song see page 137
• 6: Copy From Song
• 7: Copy from Combination
• 8: Copy from Program
• 9: Load Template Song
• 10: Save Template Song (Save as User Template Song)
page 140
• 11: GM Initialize
• 12: FF/REW Speed
• 13: Set Location (Set Location for Locate Key)
142
• 14: Copy Insert Effect
• 15: Swap Insert Effect
• 16: DKit IFX Patch
For more information, please see the "Sequencer: FUNCTION"
section on page 137.
134
Bus Select FX Control Bus
[L000...C064...R127]
[Off, FC1, FC2]
see page 137
see page 137
see page 137
see page 138
see page 139
see page 139
see page 141
see page 142
see page
see page 151
see page 151
see page 151
11: S–IFX
11–1: IFX1 (Insert Effect1)
Effect On/Off
Here you can edit the parameters of the insert effect 1, which you
[Off, L/R]
selected in the S–FX ROUTING> IFX page.
[000...127]
Effect On/Off
Turns the insert effect on/off. This is linked with the On/Off setting
[000...127]
in the S–FX ROUTING> IFX page.
Ch (Control Channel)
This specifies the MIDI channel that will control dynamic
modulation (Dmod) for the insert effect.
Ch01...Ch16: The insert effect will be controlled on the specified
MIDI channel.
All-R: The channel of any track routed through this effect can be
used to control the effect. (Channels of each routed track will be
indicated by "*".)
If a Track is using a Drum Kit, and the Track's Bus Select
(S–FX ROUTING> BUS ) is DKit, this affects the MIDI
Control Channel as well. In this case, the Track's MIDI
channel will be used to control any effect where the Ch is set
to All-R, regardless of the Bus Select (Global DRUMKIT>
VOICE) settings or the settings of the DKit IFX Patch
function.
IFX1 Parameters
Here you can set the effect parameters of the insert effect you
see
chose in the S–FX ROUTING> IFX page.
For more information, please see the "Insert Effects (IFX1–IFX5)"
section on page 210.
11–2: IFX2 (Insert Effect2) ,
11–3: IFX3 (Insert Effect3),
11–4: IFX4 (Insert Effect4),
11–5: IFX5 (Insert Effect5)
Here you can edit the effect parameters for insert effects 2–5
selected in the Insert FX Setup page.
For more information, please see "8–4: IFX1" above.
11–1...5: FUNCTION
• 0: Memory Status
• 1: Solo Setting
• 2: Undo
• 3: Copy Insert Effect
• 4: Swap Insert Effect
• 5: FF/REW Speed
• 6: Set Location (Set Location for Locate Key)
see page 137
see page 63
see page 137
see page 151
see page 151
see page 142
[Off, On]
[Ch01...16, All-R]
see page 142