Detune - Korg KROSS Parameter Manual

Effect Guide
modulation source specified with the "Source" parameter is turned
on.
When "LFO Mode" is set to 1-Shot, the Doppler effect is created
only once when the modulation source specified in the "Source"
field is turned on. At this time if you do not set the "Source"
parameter, the Doppler effect will not be created, and no effect
sound will be output.
The effect is off when a value for the modulation source
specified for the "Source" parameter is smaller than 64, and
the effect is on when the value is 64 or higher. The Doppler
effect is triggered when the value changes from 63 or smaller
to 64 or higher.
Pitch Depth
With the Doppler effect, the pitch is raised when the sound
approaches, and the pitch is lowered when the sound goes away.
This parameter sets this pitch variation.
Pan Depth
This parameter sets the width of the stereo image of the effect
sound. With larger values, the sound seems to come and go from
much further away. With positive values, the sound moves from
left to right; with negative values, the sound moves from right to
left.
Pitch
Pan Depth
= (+) value
Original Pitch
Left
<
Louder

079: Detune

Using this effect, you can obtain a detune effect that offsets the
pitch of the effect sound slightly from the pitch of the input signal.
Compared to the chorus effect, a more natural sound thickness will
be created.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Input Level
+
Detune
Input Level
Right
Paramter
Pitch Shift
Pitch [c]
[cents]
Src Source
Amt Amount
Delay Time
Delay[ms]
[ms]
←
Feedback
High Damp
HiDamp [%]
[%]
InLvl Dmod Input Level
[%] Dmod [%]
260
Doppler - Pitch / Pan Depth
Pan Depth
= (–) value
Pitch Depth
Center
Right
Pan Depth
< < < < <<<<<< >>>>>> > > > > >
Volume
Louder
High Damp
Delay
Feedback
Value Explanation
Sets the pitch
–100...+100 difference from the
input signal
Selects a modulation
Off...Tempo
source for pitch shift
Sets the modulation
–100...+100
amount for pitch shift
0...1000 Sets the delay time
Sets the feedback
–100...+100
amount
Sets the damping
0...100 amount in the high
range
Sets the modulation
–100...+100 amount of the input
level p.261
Src Source
←
Wet/Dry
Src Source
Amt Amount
Input Level Dmod [%]
Source
This parameter sets the dynamic modulation of the input level.
Input Level
x1.0
x0.5
Higher
Zero
080: Pitch Shifter
This effect changes the pitch of the input signal. You can select
from three types: Fast (quick response), Medium, and Slow
(preserves tonal quality). You can also create an effect where the
pitch is gradually raised (or dropped) using the delay with
feedback.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
Input Level
+
Input Level
Right
Paramter
←
Mode
Shift
Pitch Shift
[1/2tone]
Wet / Dry
Src Source
Amt Amount
←
Fine [cents]
Wet / Dry
Amount
Amt
[cents]
Delay Time
Delay[ms]
[ms]
Feedback
←
Position
←
Feedback
High Damp
HiDamp [%]
[%]
InLvl Dmod Input Level
[%] Dmod [%]
Src Source
Selects the
modulation source
Off...Tempo
for the input level
p.261
Sets the balance
Dry, 1 : 99...
between the effect
99 : 1, Wet
and the dry input
Selects a modulation
Off...Tempo
source for Wet/Dry
Sets the modulation
–100...+100
amount for Wet/Dry
Input Level
x1.0
Input Level Dmod= –50
Input Level Dmod= –100
Input Level Dmod= +50
Input Level Dmod= +100 x0.5
D -mod
Higher
Zero
Max
High Damp
Pitch Shifter Delay
Post
Pre
Feedback
Feedback Position
Value Explanation
Switches Pitch Shifter
Med...Fast
mode
Sets the pitch shift
–24...+24 amount by steps of a
semitone
Selects the
modulation source of
Off...Tempo
pitch shift amount
p.261
Sets the modulation
–24...+24 amount of pitch shift
amount
Sets the pitch shift
–100...+100 amount by steps of a
cent
Sets the modulation
–100...+100 amount of pitch shift
amount
0...2000 Sets the delay time
Switches the
Pre, Post feedback connection
p.261
Sets the feedback
–100...+100
amount
Sets the damping
0...100 amount in the high
range
Sets the modulation
–100...+100 amount of the input
level
Selects the
modulation source
Off...Tempo
for the input level
p.261
Input Level Dmod
D -mod
Max
Wet / Dry
Wet / Dry
p.261
p.261
p.261
p.261
p.261
p.261
p.261