Korg R3 Effect Manual: S.delay (stereo Delay)

Synthesizer / vocoder.
Hide thumbs
Effect guide
14. S.Delay
(Stereo Delay)
This is a stereo delay, and can by used as a cross-feed-
back delay effect in which the delay sounds cross over
between the left and right by changing the feedback
routing.
Stereo In - Stereo Out
Left
Trim
Stereo/Cross
Trim
Right
Type
Selects the delay type. With the Stereo setting, this will
be a conventional stereo delay. With the Cross setting,
this will be a cross-feedback delay in which the delay
sound bounces between left and right.
BPM Sync (Delay Time BPM Sync)
Specifies whether the delay tempo will be synchronized.
☞p.13 LCR Delay "BPM Sync (Delay Time BPM Sync)"
TimRatio (Time Ratio)
☞p.13 LCR Delay "TimRatio (Time Ratio)"
L Delay, R Delay (L, R Delay Time)
These set the left and right channel delay times. The de-
lay time is determined by these settings and the "TimRa-
tio" value.
If "BPM Sync" is Off, these delay times are set in msec
units. The range of this parameter will differ depending
on whether the effect is an insert effect or a master effect.
If "BPM Sync" is On, these delay times are set as a tim-
ing resolution relative to the tempo specified by the
[TEMPO] knob or MIDI clock.
Feedback
Sets the amount of feedback for the left and right chan-
nels.
HighDamp
Sets the damping amount in the high range.
Low Damp
Sets the damping amount in the low range.
Trim
Sets the input level.
Spread
Sets the width of the stereo image of the effect sound.
☞p.13 LCR Delay "Spread"
14
High Damp Low Damp
Delay
Feedback
Spread
High Damp Low Damp
Delay
Stereo/Cross
[Stereo, Cross]
[BPM Sync Off: 000.5...400.0% (OVER)
BPM Sync On: 012.5...400.0% (OVER)]
[BPM Sync Off IFX: 000...500msec
BPM Sync Off MFX: 000...700msec
BPM Sync Off: 1/64...1/1]
[000...127]
[000...100%]
[000...100%]
[000...127]
[000...127]
15. AtPanDly
This stereo delay effect pans the delay sound left and
right using the LFO.
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Left
Trim
+
Dry / Wet
Right
Trim
Dry / Wet
BPM Sync (Delay Time BPM Sync)
Specifies whether the delay tempo will be synchronized.
☞p.13 LCR Delay "BPM Sync (Delay Time BPM Sync)"
TimRatio (Time Ratio)
☞p.13 LCR Delay "TimRatio (Time Ratio)"
[Off, On]
L Delay, R Delay (L, R Delay Time)
These set the left and right channel delay times. The de-
lay time is determined by these settings and the "TimRa-
tio" value.
If "BPM Sync" is Off, these delay times are set in msec
units. The range of this parameter will differ depending
on whether the effect is an insert effect or a master effect.
If "BPM Sync" is On, these delay times are set as a tim-
ing resolution relative to the tempo specified by the
[TEMPO] knob or MIDI clock.
Feedback
Sets the feedback amount for the left channel.
ModDepth (Modulation Depth)
Sets the depth of modulation.
LFO Sync (LFO BPM Sync)
Specifies whether the internal LFO cycle will be syn-
chronized with the tempo specified by the [TEMPO]
knob or MIDI clock.
☞p.5 "LFO Sync (LFO BPM Sync)"
LFO Freq (LFO Frequency)
Sets the internal LFO frequency if "BPM Sync" is Off.
☞p.5 "LFO Freq (LFO Frequency)"
SyncNote (LFO SyncNote)
Sets the internal LFO frequency as a proportion of the
tempo set by the [TEMPO] knob if "BPM Sync" is On.
☞p.5 "SyncNote (LFO SyncNote)"
LFO Wave (LFO Waveform)
Selects the internal LFO waveform.
☞p.5 "LFO Wave (LFO Waveform)"
LFO Shape
☞p.5 "LFOShape"
(Auto Panning Delay)
High Damp Low Damp
Delay
Pan
Feedback
LFO
LFO Shape
LFO Spread
[BPM Sync Off: 000.5...400.0% (OVER)
BPM Sync On: 012.5...400.0% (OVER)]
[BPM Sync Off IFX: 0000...1000msec
BPM Sync Off MFX: 0000...1400mse
BPM Sync On: 1/64... 1/1]
[Saw, Square, Triangle, Sine, S&H]
Dry / Wet
Depth
Dry / Wet
[Off, On]
[000...127]
[000...127]
[Off, On]
[0.01...100.0Hz]
[8/1...1/64]
[–63...+63]

Advertising

   Also See for Korg R3

   Related Manuals for Korg R3

Comments to this Manuals

Symbols: 0
Latest comments: