A (Setup-A), 6–3: B (Setup-B) - Korg KROSS Parameter Manual

6–2: A (Setup-A), 6–3: B (Setup-B)
Pattern
Here you can adjust settings for the arpeggiator A and B.
Pattern* [Preset: UP...RANDOM, 0000...1279]
Octave*
Resolution*
Run (Arpeggiator Run A, B)
Gate
Velocity
Swing
Sort*
Latch*
Key Sync.*
Keyboard*
See "13–1: SETUP" on page 51
These settings are the same as "0–4: ARP (Arpeggiator)" on
page 73.
For more information, please see the "Arpeggiator Run A, B"
section on page 73..
Octave Resolution
[1, 2, 3, 4]
[ , , , , , , , ]
[Off, On]
[000...100%, Step]
[001...127, Key, Step]
[–100...+100%]
[Off, On]
[Off, On]
[Off, On]
[Off, On]
6: C–ARP (Arpeggiator) 6–2: A (Setup-A), 6–3: B (Setup-B)
6–4: SCAN ZONE
Key zone of Velocity zone of
arpeggiator A arpeggiator A
Key zone of
arpeggiator B
These settings specify the note and velocity ranges that will trigger
arpeggiators A and B.
KEY
Bottom
Top
Specifies the range of notes (keys) that will trigger arpeggiator A/
B. Top Key specifies the upper limit, and Bottom Key specifies
the lower limit.
VELOCITY
Bottom
Top
Specifies the range of velocities that will trigger arpeggiator A/B.
Top Velocity specifies the upper limit, and Bottom Velocity
specifies the lower limit.
Specifies the range of notes (keys) and velocities that will trigger
arpeggiator A/B.
Tip: You can also set the note values and velocity values by the
keyboard. (see page 13 of the Operation Guide )
Zone Map
This shows the Scan Zone for each arpeggiator, A and B.
6–1...4: FUNCTION
V
• 0: Write Combination, Write/Initialize Combination
94
• 1: Solo Setting see page 63
• 2: Compare see page 64
• 3: Auto Song Setup see page 64
• 4: Add to Favorite see page 94
• 5: Copy from Program
• 6: Copy Arpeggiator
For more information, please see the "Combination: FUNCTION"
section on page 94.
Key zone of
arpeggiator B
[C–1...G9]
[C–1...G9]
[001...127]
[001...127]
see page
see page 95
see page 95
85