Seq Page Select - Korg KROSS Parameter Manual

Sequencer mode

SEQ Page Select

Here's how you can select each page.
• Use the PAGE+/- buttons.
• Press the MENU button to access the page menu, use the
PAGE+/- buttons to select a page, and press the MENU (OK)
button or the ENTER button.
• While the above page menu is displayed, press the FUNCTION
(TABS) button, then use the PAGE+/- buttons to select a page
by its tab, and then press the MENU (OK) button or the ENTER
button.
• Hold down the MENU button and press the PAGE- or PAGE+
buttons.
For details, see "Selecting pages and tabs" on page 12.
.
102
Page Tab
Song selection, recording/playback, and tempo
MAIN
setting (see page 103)
PROG Program selection for each track (see page 105)
SEQ Pan and volume settings etc. for each track (see
MIX
page 106)
REC Recording method selection (see page 107)
ARP Simple arpeggiator editing (see page 111)
AUDIO IN External audio input settings (see page 112)
S–INPUT/
CTRL
CONTROLLERS SW1, 2, and tempo settings (see page 112)
LOOP Loop settings for each track (see page 113)
S–LOOP/
TONE ADJ Tone Adjust editing (see page 114)
TONE
EG ADJ EG (ADSR) editing (see page 115)
MIDI channel setting for eack tarck (see page
MIDI
116)
OSC OSC setting for eack track (see page 116)
S–TRACK
PITCH Pitch setting for eack track (see page 117)
SCALE Scale setting for eack track (see page 118)
KEY ZONE
Key zone and velocity zone (see page 118)
S–ZONE/ VEL ZONE
DELAY
Time delay from note-on to beginning of sound.
DELAY
(see page 120)
S–MIDI MIDI transmit/receive filter settings. (see page
1, 2, 3, 4
FILTER 116)
Edit operations such as copying or deleting a
S–TRACK SELECT TO MEASURE TO
track, quantizing, or event editing (see page
EDIT EDIT
124)
Arpeggiator assignments to each timbre (see
ASSIGN
page 125)
A Arpeggiator A settings (see page 126)
S–ARP
B Arpeggiator B settings (see page 126)
Arpeggiator trigger region settings (see page
SCAN ZONE
127)
Drum Track pattern selection and trigger region
PATTERN
settings (see page 127)
S–DRUM
TRACK
Drum Track input/output MIDI channel settings
CHANNEL
(see page 128)
Step sequencer program selection and length
BASIC
settings (see page 130)
EDIT Step on/off entry (see page 130)
S–STEP
SEQ
INST Instrument settings (see page 131)
Step sequencer settings such as accent and
MOD
swing (see page 131)
Bus assignments from each timbre to the insert
BUS
effects (see page 132)
Send amounts from each timbre to the master
SEND
effects (see page 132)
S–FX
ROUTING
Insert effect type selection and chain settings
IFX
(see page 133)
Post-insert effect routing settings
MIXER
(see page 134)
S–IFX IFX1, 2, 3, 4, 5 Insert effect 1–5 settings (see page 134)
Master effect type selection and chain settings
SETUP
(see page 135)
S–MFX
MFX1, 2 Master effect 1 and 2 settings (see page 136)
Main content