Korg KROSS Parameter Manual page 131

5–3: 3 (MIDI Filter3)
Enable SW1
Enable SW2
These settings specify whether SW1 Mod (CC#80) and SW2 Mod
(CC#81) will be transmitted and received if they are assigned to
the SW1 and SW2 buttons.
Note: If Portamento SW (CC#65) is assigned to SW1 or SW2, the
Enable Portamento SW setting on the 1 page will take priority.
Note: The functions of SW1 and SW2 are assigned on the P1:
Controllers Setup page (see page 112).
Enable Foot Switch
Specifies whether or not the effect of the ASSIGNABLE SWITCH
will be received when a MIDI control change is assigned. The
function is assigned in G–INPUT/CTRL> FOOT page.
Enable Foot Pedal
Specifies whether or not the effect of the ASSIGNABLE PEDAL
will be received when a MIDI control change is assigned. The
function is assigned in G–INPUT/CTRL> FOOT page.
5–4: 4 (MIDI Filter4)
[Off, On] Enable Other CC Messages
Specifies whether or not MIDI control messages not covered in the
[Off, On]
preceding MIDI Filter items will be received.
5–1...4: FUNCTION
V
• 0: Memory Status
• 1: Solo Setting
• 2: Undo see page 137
• 3: Create New Song
[Off, On]
• 4: Rename Song
• 5: Delete Song
• 6: Copy From Song
• 7: Copy from Combination
[Off, On]
• 8: Copy from Program
• 9: Load Template Song
• 10: Save Template Song (Save as User Template Song)
page 140
• 11: GM Initialize
• 12: FF/REW Speed
• 13: Set Location (Set Location for Locate Key)
142
For more information, please see the "Sequencer: FUNCTION"
section on page 137.
5: S– MIDI FILTER 5–3: 3 (MIDI Filter3)
see page 137
see page 63
see page 137
see page 137
see page 137
see page 137
see page 138
see page 139
see page 139
see page 141
see page 142
[Off, On]
see
see page
123