Vox Wah - Korg KROSS Parameter Manual

013: VOX Wah

This models the legendary VOX V847 and V848 Clyde McCoy
wah pedals. Its distinctive tone, sounding as though it were wrung
from the throat, made this pedal a favorite of many pro musicians.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
+
Auto Sensitivity
Envelope Attack / Polarity
D -mod
Right
Paramter Value
Type Type V847, V848
←
Open 1...100
←
Close 1...100
Pedal(Dmod)
Sweep Sweep Mode
, Auto
Src Pedal Source 0...100
Pedal
Manu 0...100
Manual
Auto
Auto Sens 0...100
Sensitivity
Attack Auto Attack
Auto,
Pol Auto Polarity Dmod,
LFO
←
Wet/Dry
Src Source
Amt Amount
Single size effects 007: St.Parametric 4EQ (Stereo Parametric 4EQ)
Wet / Dry
Wah
Auto
Mode
Pedal(D-mod)
Wet / Dry
Explanation
Selects the type of
wah
Sets the lower limit of
the wah center
frequency p.223
Sets the upper limit of
the wah center
frequency p.223
Switches between
pedal wah and auto-
wah
Specifies the
modulation source
that will use the pedal
wah
Sets the center
frequency for the
pedal wah when the
modulation source is
not moved
Sets the auto-wah
sensitivity
Sets the auto-wah's
attack speed
Specifies whether the
auto-wah sweep is
normal or inverted
Sets the balance
between the effect
and the dry input
Selects a modulation
source for Wet/Dry
Sets the modulation
amount for Wet/Dry
014: St. Random Filter (Stereo
Random Filter)
This stereo band pass filter uses a step-shape waveform and
random LFO for modulation. You can create a special effect from
filter oscillation.
Stereo In - Stereo Out
Left
Right
LFO: Step-Tri/Random
Paramter Value
LFO
LFO StpTri, Rndm
Waveform
LFO Phase
←
–180...+180
[deg]
LFO Freq
LFO [Hz] 0.02...20.00
[Hz]
Src Source Off...Tempo
–20.00...
Amt Amount
+20.00
Step Freq
Step[Hz] 0.05...50.00
[Hz]
–50.00...
Amt Amount
+50.00
BPM/MIDI
←
Off, On
Sync
MIDI,
←
BPM 40.00...
300.00
←
Base Note ...
←
Times x1...x32
Step Base
←
...
Note
←
Times x1...x32
Manual Manual 0...100
Src Source Off...Tempo
Amt Amount –100...+100
←
Depth 0...100
Src Source Off...Tempo
Amt Amount –100...+100
←
Resonance 0...100
Wet / Dry
Filter
Filter
Wet / Dry
LFO Phase
Explanation
Selects the LFO
Waveform p.226
Sets the LFO phase
difference between
the left and right
p.226
Sets the speed of the
LFO p.226
Selects the
modulation source
used for both LFO
speed and step speed
Sets the modulation
amount of LFO speed
Sets the LFO step
speed (speed that
changes in steps
p.226
Sets the modulation
amount of LFO step
speed
When this is on, the
LFO speed is set by
BPM, Base Note, and
Times, instead of
Frequency p.223
MIDI syncs to the
system tempo; 40–
300 sets the tempo
manually for this
individual effect p.226
Selects the type of
notes that specify the
LFO speed p.226
Sets the number of
notes that specify the
LFO speed p.226
Selects the type of
notes to specify the
LFO step speed
p.226
Sets the number of
notes to specify the
LFO step speed
p.226
Sets the filter center
frequency
Selects the
modulation source
for the filter center
frequency
Sets the modulation
amount for the filter
center frequency
Sets the modulation
depth of filter center
frequency
Selects the
modulation source of
filter modulation
Sets the modulation
amount of filter
modulation
Sets the resonance
amount
225