P–Pitch - Korg KROSS Parameter Manual

Hide thumbs Also See for KROSS:
Table of Contents

Advertisement

Program mode
3–1...5: FUNCTION
V
• 0: Write Program, Write/Initialize Program
• 1: Solo Setting
see page 63
• 2: Compare
see page 64
• 3: Auto Song Setup
• 4: Add to Favorite
• 5: Copy Oscillator
• 6: Swap Oscillator
For more information, please see the "Program: Function" section
on page 63.
14
see page 63
see page 64
see page 64
see page 64
see page 64
4: P–PITCH
This page contains all of the settings for Oscillator 1's pitch
modulation.
4–1: BASIC
Here, you can:
• Specify pitch bend being controlled by the pitch bend wheel (or
an incoming pitch bend message) set to independent Bend Up
and Bend Down, or controlled by an incoming message CC#16
(the ribbon control message etc).
• Use Pitch Slope to control how the pitch changes when you
play up and down the keyboard.
• Assign AMS modulation for pitch.
OSC (Oscillator Select)
Select the oscillator (1 or 2) that you want to edit.
Note: Oscillator 2 can be selected if Oscillator Mode is set to
Double.
Octave
This sets the basic pitch of the Oscillator, in octaves. The default is
+0[8']. The standard octave of a multisample is +0 [8'].
Transpose
This adjusts the pitch in semitones, over a range of ±1 octave.
Tune
This adjusts the pitch in cents, over a range of ±1 octave. A cent is
1/100 of a semitone.
Offset (Frequency Offset)
This adjusts the pitch by increments of 0.1 Hz. Frequency Offset
is different from Tune in that, when used to detune the two
oscillators, it can create a constant beat frequency across the range
of the keyboard.
CONTROLLERS
Bend (+)
Specifies the amount of pitch change in semitone units that occurs
when you move the pitch bend wheel away from yourself (or when
a pitch bend message with a value of 1 or higher is received). For
normal pitch bend, set this to a positive value.
For example with a setting of +12, moving the pitch bend wheel
away from yourself will raise the pitch of the notes you've played,
by up to one octave.
AMS Intensity
[1, 2]
[–2[32'], –1[16'], +0[8'], +1[4']]
[–12...+12]
[–1200...+1200]
[–10.0Hz ... +10Hz]
[–60...+12]

Advertisement

Table of Contents
loading

Table of Contents