Ifx (Insert Fx Setup) - Korg KROSS Parameter Manual

10–3: IFX (Insert FX Setup)
Effect On/Off Effect Select
Here you can choose the type of each insert effect 1 through 5, its
on/off status, chaining, and adjust the post-IFX mixer settings. For
insert effects, the direct sound (Dry) is always stereo-in and out.
The input/output configuration of the effect sound (Wet) depends
on the effect type. For descriptions of the individual effects, please
see "Effect Guide," beginning on page 207.
The following parameters are the same as in Program mode. For
more information, please see "16–3: Insert FX Setup" on page 60.
However, unlike in Program mode, insert effect dynamic
modulation (Dmod) and the post-IFX Pan: #8, Send 1, and Send
2 are controlled on the MIDI channel specified by Ch (S–IFX>
IFX1–5). The control changes used are the same as in Program
mode.
The pan (CC#8), send 1 and 2 settings you make here will be used
when the song is played or recorded from the beginning. If you
change the settings while recording a MIDI track, the changes will
be recorded as part of the musical data, and the settings will
change when the data is played back. You can also change these
settings during playback. However if pan (CC#8), send 1, or 2 data
has been recorded, the settings will change accordingly.
If Status (SEQ> PROG) is either INT or BTH, CC#8,
CC#93, and CC#91 can be received to control the pan
following the insert effect, send 1, or send 2 respectively, and
change their settings. When you switch songs or return to the
beginning of the song, tracks whose Status is BTH, EXT, or
EX2 will transmit these settings via MIDI. This data will be
transmitted on the MIDI channels specified in the IFX 1–5
pages (S–IFX> IFX1–5). (See G–MIDI> OUT: SEQ Mode
"Track MIDI Out" on page 162)
10: S–FX ROUTING (Effect Routing) 10–3: IFX (Insert FX Setup)
Chain Chain to
1 (IFX1)
Effect On/Off
Effect Select
Category/IFX Select menu:
Chain
Chain to
2 (IFX2)
Effect On/Off
Effect Select
Chain
Chain to
3 (IFX3)
Effect On/Off
Effect Select
Chain
Chain to
4 (IFX4)
Effect On/Off
Effect Select
Chain
5 (IFX5)
Effect On/Off
Effect Select
These settings are the same as for a program.
See "16–3: Insert FX Setup" on page 60
[Off, On]
[000, S00...S63, D00...D10]
[Off, On]
[2...5]
[Off, On]
[000, S00...S61, D00...D09]
[Off, On]
[3...5]
[Off, On]
[000, S00...S61, D00...D09]
[Off, On]
[4, 5]
[Off, On]
[000, S00...S61, D00...D09]
[Off, On]
[Off, On]
[000, S00...S61]
133