50: St.bpm Delay (Stereo Bpm Delay); 51: Sequence Dly (Sequence Delay) - Korg MICROX X50 Parameter Manual

InLvl Mod (Input Level Dmod [%])
Sets the modulation amount of the input level
h
Src (Source)
Selects the modulation source for the input level
Spread
i
Sets the width of the stereo image of the effect sound
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
j
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
a: BPM, b: L Bs, b: Times, c: C Bs, c: Times, d: R Bs, d: Times
The delay time is the length of the note obtained by multiplying
the "Bs" parameter by the Times value, in relation to the tempo
specified by the "BPM" parameter (or the MIDI Clock tempo if
"BPM" is set to MIDI).
f: Time Over? >
You can set the delay time up to 1365msec. If the delay time
exceeds this limit, the error message "OVER!" appears in the dis-
play. Set the delay time parameters so that this message will not
appear. "Time Over?>" is only a display parameter.
50: St.BPM Delay
This stereo delay enables you to set the delay time to match
the song tempo.
Stereo In - Stereo Out
Left
Input Level D-mod
Input Level D-mod
Right
Tempo
BPM
Base Note x Times
BPM
Base Note x Times
BPM
a
Selects MIDI Clock and assigns tempo
L Bs (L Delay Base Note)
Selects the type of notes to specify the left channel delay time
Times
b
Sets the number of notes to specify the left channel delay time
Adj (Adjust)
Fine-adjust the left channel delay time
R Bs (R Delay Base Note)
Selects the type of notes to specify the right channel delay time
Times
c
Sets the number of notes to specify the right channel delay time
Adj (Adjust)
Fine-adjust the right channel delay time
L Fb (L Feedback)
Sets the feedback amount for the left channel
(Source)
d
Selects the modulation source of feedback amount
(Amount L)
Sets the modulation amount of the left channel feedback
R Fb (R Feedback)
Sets the feedback amount for the right channel
e
(Amount R)
Sets the modulation amount of the right channel feedback
132
–100...+100
☞ Fx:37,
Off...Tempo
☞ Fx:43
Dry, 1:99...99:1, Wet
Off...Tempo
–100...+100
(Stereo BPM Delay)
Wet / Dry
High Damp Low Damp
Delay
Feedback
High Damp Low Damp
Delay
Wet / Dry
Adjust [%]
Adjust [%]
MIDI, 40...240
☞ Fx:49,
☞ Fx:49,
☞ Fx:49
–2.50...+2.50%
☞ Fx:49,
–2.50...+2.50%
–100...+100
Off...Tempo
–100...+100
–100...+100
–100...+100
Time Over? L >
Display the error message if the left channel delay time exceeds the
upper limit
f
☞ Fx:37
R >
Display the error message if the right channel delay time exceeds the
0...50
upper limit
HiDamp (High Damp)
Sets the damping amount in the high range
g
LoDamp (Low Damp)
Sets the damping amount in the low range
InLvl Mod (Input Level Mod [%])
Sets the modulation amount of the input level
h
Src (Source)
Selects the modulation source for the input level
W/D (Wet/Dly)
Sets the balance between the effect and dry sounds
(Source)
i
Selects the modulation source of the effect balance
(Amount)
Sets the modulation amount of the effect balance
f: Time Over? L >, f: R >
You can set the delay time up to 682msec. If the delay time
exceeds this limit, the error message "OVER!" appears in the dis-
play. Set the delay time parameters so that this message will not
appear. "Time Over?>" is only a display parameter.
51: Sequence Dly
This four-tap delay enables you to select a tempo and rhythm
pattern to set up each tap.
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Left
Input Level D-mod
+
High Damp Low Damp
Input Level D-mod
Right
Tempo
BPM
Rythm Pattern
BPM
1...16
Selects MIDI Clock and assigns tempo
a
Rhythm (Rhythm Pattern)
Selects a rhythm pattern
Tap1 Pan
b
Sets the panning of Tap1
Tap2 Pan
c
Sets the panning of Tap2
1...16
Tap3 Pan
d
Sets the panning of Tap3
☞ Fx:49
Tap4 Pan
e
Sets the panning of Tap4
Fb (Feedback)
Sets the feedback amount
(Source)
f
Selects the modulation source of feedback amount
(Amount)
Sets the modulation amount of the feedback
HiDamp (High Damp)
Sets the damping amount in the high range
g
LoDamp (Low Damp)
Sets the damping amount in the low range
☞ Fx:37,
Dry, 1:99...99:1, Wet
(Sequence Delay)
Pan
Delay
Feedback
BPM
MIDI, 44...240
– – – ...
----, OVER!
☞
----, OVER!
☞
0...100%
☞ Fx:43
0...100%
☞ Fx:43
–100...+100
Off...Tempo
☞ Fx:37
Off...Tempo
–100...+100
Wet / Dry
Wet / Dry
☞,
3
☞,
L, 1...99, R
L, 1...99, R
L, 1...99, R
L, 1...99, R
–100...+100
Off...Tempo
–100...+100
0...100%
☞ Fx:43
0...100%
☞ Fx:43