Smallphase (Small Phaser) - Korg KROSS Parameter Manual

Src Source Off...Tempo
Amt Amount –100...+100
←
Resonance –100...+100
High Damp
HiDamp[%] 0...100
[%]
←
Manual 0...100
Src Source Off...Tempo
Amt Amount –100...+100
–Wet...
←
Wet/Dry –99 : 1, Dry,
99 : 1...Wet
Src Source Off...Tempo
Amt Amount –100...+100
Resonance
Wet/Dry
The peak shape of the positive and negative Feedback value is
different. The harmonics will be emphasized when the effect
sound is mixed with the dry sound, if you set a positive value for
both "Resonance" and "Wet/Dry," and if you set a negative value
for both "Resonance" and "Wet/Dry."
High Damp [%]
This parameter sets the amount of damping of the resonance in the
high range. Increasing the value will cut high-range harmonics.

030: SmallPHASE (Small Phaser)

This models a classic phaser that was born in New York during the
1970s. With a warm, rich tone, it is also loved by many electric
piano players.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
+
Right
LFO
Paramter Value
←
Speed [Hz] 0.10...10.0
←
Color Off, On
–Wet...
←
Wet/Dry –1 : 99, Dry,
1 : 99...Wet
Src Source Off...Tempo
Amt Amount –100...+100
Color
This lets you choose between two types of phaser sound. Turning
this On produces a deeper phase shift effect with a distinctive
modulation.
Selects the
modulation source
for the LFO
modulation depth
Sets the modulation
amount of the LFO
modulation depth
Sets the resonance
amount p.235
Sets the resonance
damping amount in
the high range p.235
Sets the frequency
where the effect is
applied
Selects the
modulation source
for the LFO
modulation
Sets the modulation
amount of the LFO
modulation
Sets the balance
between the effect
and the dry input
p.226, p.235
Selects a modulation
source for Wet/Dry
Sets the modulation
amount for Wet/Dry
Wet / Dry
Color
Phaser
Wet / Dry
Explanation
Sets the speed of the
LFO
Switches the tone of
the phaser sound
p.235
Sets the balance
between the effect
and the dry input
p.226, p.235
Selects a modulation
source for Wet/Dry
Sets the modulation
amount for Wet/Dry
Single size effects 030: SmallPHASE (Small Phaser)
031: Orange PHASE (Orange
Phaser)
This models a standard model of analog phaser that achieved great
popularity. It gives a sense of movement to electric piano sounds,
adding a rich-sounding phase shift effect.
032: Black PHASE (Black Phaser)
This models a Danish-made four-stage phaser that featured a wide
range.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
+
Right
LFO
Paramter Value
←
Speed [Hz] 0.10...10.0
←
Depth 0...100
←
Manual 1...100
←
Resonance 0...100
–Wet...
←
Wet/Dry –1 : 99, Dry,
1 : 99...Wet
Src Source Off...Tempo
Amt Amount –100...+100
033: U-VIBE
This models a famous chorus/vibrato pedal effect. Simulating a
rotary speaker, this effect produced a fascinatingly lush tone.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
+
Right
LFO
Paramter Value
←
Speed [Hz] 0.10...10.0
←
Depth 0...100
←
Mix 0...100
–Wet...
←
Wet/Dry –1 : 99, Dry,
1 : 99...Wet
Src Source Off...Tempo
Amt Amount –100...+100
Wet / Dry
Resonance
Phaser
Wet / Dry
Explanation
Sets the speed of the
LFO
Sets the depth of LFO
modulation
Sets the frequency
where the effect is
applied
Sets the resonance
amount
Sets the balance
between the effect
and the dry input
Selects a modulation
source for Wet/Dry
Sets the modulation
amount for Wet/Dry
Wet / Dry
U-VIBE
Mix
Wet / Dry
Explanation
Sets the speed of the
vibration
Sets the depth of
vibration
Sets the effect mix
level
Sets the balance
between the effect
and the dry input
p.236
Selects a modulation
source for Wet/Dry
Sets the modulation
amount for Wet/Dry
235