Table of Contents
Advertisement
LFO Waveform
Selects the LFO waveform.
See page 40 "LFO Waveform"
LFO Shape
See page 40 "LFO Shape"
LFO KeySync
Specifies whether the LFO will be reset by note-on
See page 40 "LFO KeySync"
LFO Init Phase
Sets the starting location of the waveform
Note: This parameter will be displayed and can be set if "LFO KeySync" is On.
See page 41 "LFO Init Phase"
LFO Spread
Sets the LFO phase difference between the left and right channels
[Saw, Square, Triangle, Sine, S&H]
[–63...+63]
[Off, On]
[000...180°]
[–180...+180°]
Phaser
This effect creates a swell by shifting the phase. You can add spread to the sound
by offsetting the phase of the left and right LFOs from each other.
Stereo In - Stereo Out
Left
Right
LFO
LFO Shape
Dry/Wet
Sets the balance between the effect and dry sounds
Type
Selects the phaser type
Manual
Sets the frequency to which the effect is applied
Mod Depth
Sets the depth of LFO modulation
Resonance
Sets the resonance amount
Phase
Switches the phase of the output and feedback
LFO Tempo Sync
Specifies whether the LFO cycle will be synchronized with the tempo specified
by the TAP button or MIDI clock
Effect guide
Dry / Wet
Phaser
Resonance
High Damp
Phaser
Dry / Wet
LFO Spread
[Dry, 99:1...1:99, Wet]
[BLUE, U-VB]
[000...127]
[000...127]
[000...127]
[Off, On]
[+, –]
51
Advertisement
Table of Contents
