029: Stereo Phaser; 030: Small Phs (Small Phaser) - Korg PS60 Parameter Manual

Performance synthesizer
Hide thumbs Also See for PS60:
Table of Contents

Advertisement

Tube
53...20.00k,
High Cut
T H[Hz]
Thru
[Hz]
Tube
T G[Hz]
–24.0...+24.0
Gain [dB]
Tube
Saturation
T Saturat
0...100
[%]
Tube Bias
T Bias
0...100
Tube Output
Lvl [dB]
–48.0...+0.0
Level [dB]
Dry, 1 : 99...
Wet/Dry
99 : 1, Wet
Source
Off...Tempo
Amount
–100...+100
Mic Position
This expresses the effect that the mic position has on the 
sound. The Close setting is the closest mic position, and the 
Far setting is the farthest.

029: Stereo Phaser

This effect creates a swell by shifting the phase. It is very 
effective on electric piano sounds. You can add spread to the 
sound by offsetting the phase of the left and right LFOs from 
each other.
Stereo In - Stereo Out
Left
Phaser
Phaser
Right
LFO Shape
LFO: Tri / Sine
Full
Quick
Value
parameter
parameter
Manual
0...100
Source
Off...Tempo
Amount
–100...+100
Depth
0...100
Source
Off...Tempo
Amount
–100...+100
Resonance
–100...+100
High Damp
0...100
[%]
LFO
Triangle,
Waveform
Sine
LFO Shape
–100...+100
Phase [deg]
–180...+180
LFO Freq
LFO [Hz]
0.02...20.00
[Hz]
Sets the frequency of
the high cut filter
Sets the input gain to
the vacuum tube
preamp
Sets the input/output
response of the
preamp
p.98
Sets the bias level of
the preamp
p.98
Sets the output level
of the preamp
Sets the balance
between the effect
and the dry input
Selects a modulation
source for Wet/Dry
Sets the modulation
amount for Wet/Dry
Wet / Dry
Resonance
High Damp
Wet / Dry
LFO Phase
Explanation
Sets the frequency
where the effect is
applied
Selects the
modulation source
for the LFO
modulation
Sets the modulation
amount of the LFO
modulation
Sets the depth of LFO
modulation
Selects the
modulation source
for the LFO
modulation depth
Sets the modulation
amount of the LFO
modulation depth
Sets the resonance
amount
p.99
Sets the resonance
damping amount in
the high range
p.99
Selects the LFO
Waveform
Changes the
curvature of the LFO
Waveform
p.90
Sets the LFO phase
difference between the
left and right
p.91
Sets the speed of the
LFO
p.89
IFX (Insert effects) List 029: Stereo Phaser
Source
Off...Tempo
–20.00...
Amount
+20.00
BPM/MIDI
LFO MIDI
Off, On
Sync
Sync
MIDI,
BPM
40.00...
300.00
Base Note
...
Times
x1...x32
–Wet...
Wet/Dry
–1 : 99, Dry,
1 : 99...Wet
Source
Off...Tempo
Amount
–100...+100
Resonance
Wet/Dry
The peak shape of the positive and negative Feedback value 
is different. The harmonics will be emphasized when the 
effect sound is mixed with the dry sound, if you set a 
positive value for both "Resonance" and "Wet/Dry," and if 
you set a negative value for both "Resonance" and "Wet/
Dry."
High Damp [%]
This parameter sets the amount of damping of the resonance 
in the high range. Increasing the value will cut high‐range 
harmonics.

030: Small Phs (Small Phaser)

This models a classic phaser that was born in New York 
during the 1970s. With a warm, rich tone, it is also loved by 
many electric piano players.
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Left
+
Right
LFO
Full
Quick
Value
parameter
parameter
Speed [Hz]
0.10...10.0
Color
Off, On
–Wet...
Wet/Dry
–1 : 99, Dry,
1 : 99...Wet
Source
Off...Tempo
Amount
–100...+100
Color
This lets you choose between two types of phaser sound. 
Turning this On produces a deeper phase shift effect with a 
distinctive modulation.
Selects a modulation
source for LFO speed
Sets the modulation
amount of LFO speed
When this is on, the
LFO speed is set by
BPM, Base Note, and
Times, instead of
Frequency
p.89
MIDI syncs to the
system tempo; 40–
300 sets the tempo
manually for this
individual effect p.89
Selects the type of
notes that specify the
LFO speed
p.89
Sets the number of
notes that specify the
LFO speed
p.89
Sets the balance
between the effect
and the dry input
p.91, p.99
Selects a modulation
source for Wet/Dry
Sets the modulation
amount for Wet/Dry
Wet / Dry
Color
Phaser
Wet / Dry
Explanation
Sets the speed of the
LFO
Switches the tone of
the phaser sound
p.100
Sets the balance
between the effect
and the dry input
p.91, p.99
Selects a modulation
source for Wet/Dry
Sets the modulation
amount for Wet/Dry
99

Advertisement

Table of Contents
loading

Table of Contents