Example No Commands; No Mirror-Port; No Https Timeout; Figure 129 Cli: Reset To The Factory Default Example - ZyXEL Communications GS-3012F User Manual

GS-3012/GS-3012F User's Guide

Figure 129 CLI: Reset to the Factory Default Example

ras# erase running-config
ras# write memory
ras# write memory 2

31.7 Example no Commands

These are the commonly used command examples that belong to the "no" group of
commands.

31.7.1 no mirror-port

Syntax:
Disables port mirroring on the switch. An example is shown next.

Figure 130 no mirror-port Command Example

ras(config)# no mirror-port

31.7.2 no https timeout

Syntax:
Resets the https session timeout to default. An example is shown next. The session timeout is
reset to 300 seconds.

Figure 131 no https timeout Command Example

ras(config)# no https timeout
Cache timeout 300
201
no mirror-port
no https timeout
Chapter 31 Command Examples