Config-Vlan Commands; Table 92 Interface Route-Domain Commands; Table 93 Command Summary: Config-Vlan Commands - ZyXEL Communications GS-4024 User Manual

Use these commands to configure the IP routing domains.

Table 92 interface route-domain Commands

COMMAND
interface
route-domain
<ip-address>/
<mask-bits>
exit
ip
no

39.9.6 config-vlan Commands

The following table lists the

Table 93 Command Summary: config-vlan Commands

COMMAND
vlan <1-4094>
exit
Chapter 39 Introducing the Commands
dvmrp
igmp <v1|v2>
ospf authentication-
key <k>
ospf authentication-
same-aa
ospf cost <1-65535>
ospf message-digest-
key <k>
rip direction
<Outgoing|In>
vrrp authentication-
key <k>
ip dvmrp
ip igmp
ip ospf
authentication-key
ip ospf
authentication-sama
ip ospf cost
ip ospf message-
digest-key
ip vrrp
authentication-key
commands in configuration mode.
vlan
GS-4024 User's Guide
DESCRIPTION
Enables a routing domain for configuration.
Exits from the interface routing-domain
command mode.
Enables this function to permit VLAN groups
beyond the local switch.
Enables IGMP in this routing domain.
Enables OSPF authentication in this routing
domain.
Sets the same OSPF authentication settings in
the routing domain as the associated area.
Sets the OSPF cost in this routing domain.
Sets the OSPF authentication key in this
routing domain.
Sets the RIP direction in this routing domain.
Sets the VRRP authentication key in the
routing domain.
Disables DVMRP in this routing domain.
Disables IP IGMP in this routing domain.
Disables OSPF authentication key settings in
this routing domain.
Sets the routing domain not to use the same
OSPF authentication settings as the area.
Disables the OSPF cost in the routing domain.
Sets the routing domain not to use a security
key in OSPF.
Resets the VRRP authentication settings.
DESCRIPTION
Creates a new VLAN group.
Leaves the VLAN configuration mode.
247