Config-Vlan Commands; Table 98 Command Summary: Config-Vlan Commands - ZyXEL Communications ZyXEL Dimension GS-4012F User Manual

GS-4012F/4024 User's Guide
Table 97 interface route-domain Commands (continued)
COMMAND
no

40.9.6 config-vlan Commands

The following table lists the

Table 98 Command Summary: config-vlan Commands

COMMAND
vlan <1-4094>
exit
fixed <port-list>
forbidden <port-
list>
help
inactive
ip address
name <name-str>
no
264
rip direction
<Outgoing|In>
vrrp authentication-
key <k>
ip dvmrp
ip igmp
ip ospf
authentication-key
ip ospf
authentication-sama
ip ospf cost
ip ospf message-
digest-key
ip vrrp
authentication-key
commands in configuration mode.
vlan
<ip-address>
<mask>
<ip-address>
<mask> manageable
default gateway
<ip-address>
fixed <port-list>
DESCRIPTION
Sets the RIP direction in this routing domain.
Sets the VRRP authentication key in the
routing domain.
Disables DVMRP in this routing domain.
Disables IP IGMP in this routing domain.
Disables OSPF authentication key settings in
this routing domain.
Sets the routing domain not to use the same
OSPF authentication settings as the area.
Disables the OSPF cost in the routing domain.
Sets the routing domain not to use a security
key in OSPF.
Resets the VRRP authentication settings.
DESCRIPTION
Creates a new VLAN group.
Leaves the VLAN configuration mode.
Specifies the port(s) to be a permanent
member of this VLAN group.
Specifies the port(s) you want to
prohibit from joining this VLAN group.
Displays a list of available VLAN
commands.
Disables the specified VLAN.
Sets the IP address of the switch in the
VLAN.
Sets the IP address of the switch in the
VLAN and allow remote management
to this IP address.
Sets the default gateway IP address in
this VLAN.
Specifies a name for identification
purposes.
Sets fixed port(s) to normal port(s).
Chapter 40 Introducing the Commands