User Phone Number Names; System Control From Any Phone Number - Eldes ESIM384 Installation Manual

Delete user phone
number
attEntIon:
NeVeR add a phone number of the device's SIM card as a user phone number!
attEntIon: Once User 1 phone number is set, it will be restricted to modify it only.
notE: Multiple user phone numbers can be set by a single SMS text message,
Example: 1111_NR1:+44170911XXXX1_ NR2:+44170911XXXX2_NR6:0170911XXXX3_NR10:+44170911XXXX4
notE: Multiple user phone numbers can be deleted by a single SMS text message, Example: 1111_NR2:DEL_NR3:DEL_NR6:DEL_NR9:DEL_
NR:10:DEL

8.1. User Phone number names

When the system is armed or disarmed by free of charge phone call or SMS text message, the system sends a confirmation by SMS text mes-
sage to user phone number that the system arming/disarming was initiated from. the SMS text message is sent regarding each partition
separately and contains system status and partition name as well as it may contain a user name, set to the user phone number.
Manage user phone
number name

8.2. System Control from any Phone number

By default, once a user phone number is listed, the system ignores any incoming calls and SMS text messages from a non-listed phone
number as well as it rejects the SMS text messages containing wrong SMS password even from a listed user phone number. to permit/deny
system arming/disarming by phone call and SMS text message that contain a valid SMS password, configuration by SMS text message that
contain a valid SMS password from any phone number, please refer to the following configuration methods.
Enable system control
from any phone
number
attEntIon: Due to security reasons it is HIGHLY UNReCOMMeNDeD to enable this feature.
ESIM384 Installation and Configuration Manual v1.1
SMS text message content:
ssss_NRup:DeL
SMS
Value: ssss – 4-digit SMS password; up – user phone number slot, range – [2... 10].
Example: 1111_NR2:DEL
Menu path:
OK → iiii → OK → PRIMARY SettINGS → OK → CALL/SMS SettINGS → OK → USeRS → OK →
EKB2
GSM USeR 2... 10 → OK → PHONe NUMBeR → OK → OK
Value: iiii – 4-digit installer code;
ElDES
Config-
this operation may be carried out from the PC using the ELDES Configuration software.
uration
software
ElDES
Config-
this operation may be carried out from the PC using the ELDES Configuration software.
uration
software
SMS text message content:
ssss_StR:ON
SMS
Value: ssss – 4-digit SMS password.
Example: 1111_STR:ON
Menu path:
OK → iiii → OK → PRIMARY SettINGS → OK → CALL/SMS SettINGS → OK → CtRL FROM ANY
EKB2
NUM → OK → eNABLe → OK
Value: iiii – 4-digit installer code;
Enter parameter 12 and parameter status value:
EKB3/
12 1 #
EKB3W/
EWKB4
Example: 121#
ElDES
Config-
this operation may be carried out from the PC using the ELDES Configuration software.
uration
software
35
EN 35