Wired Siren/Bell - Eldes ESIM384 Installation Manual

20. WIrED SIrEn/BEll

When the system is in alarm state, the siren/bell will sound until the set time (by default – 1 minute) expires or until the system is disarmed.
to set the alarm duration, please refer to the following configuration methods.
Set alarm duration
View alarm duration
For siren/bell wiring diagram, please refer to 2.3.3. Siren.
notE:
the maximum supported alarm duration is 30 minutes that can be set up using ELDES Configuration software only. "0" value disables
the siren/bell.
notE:
Due to battery power saving reasons, the wireless siren will sound for up to 6 minutes max. regardless of the set up alarm duration
value when it is longer than 6 minutes
100 100 EN
SMS text message content:
ssss_SIReN:t
SMS
Value: ssss – 4-digit SMS password; t – alarm duration, range – [0... 5] minutes.
Example: 1111_SIREN:4
Menu path:
OK → iiii → OK → PRIMARY Sett INGS → OK → SIReN SettINGS → OK → ALARM DURAtION
EKB2
→ OK → tt → OK
Value: iiii – 4-digit installer code; tt – alarm duration, range – [1... 10] minutes.
Enter parameter 10 and alarm duration:
EKB3/
10 tt #
EKB3W/
Value: tt – alarm duration, range – [00... 10] minutes.
EWKB4
Example: 1007#
ElDES
Config-
uration
this operation may be carried out from the PC using the ELDES Configuration software.
soft-
ware
SMS text message content:
ssss_SIReN
SMS
Value: ssss – 4-digit SMS password
Example: 1111_SIREN
Menu path:
OK → iiii → OK → PRIMARY Sett INGS → OK → SIReN SettINGS → OK → ALARM DURAtION
EKB2
Value: iiii – 4-digit installer code.
ElDES
Config-
uration this operation may be carried out from the PC using the ELDES Configuration software.
soft-
ware
ESIM384 Installation and Configuration Manual v1.1