Service Mode; Remote System Restart - Eldes ESIM384 Installation Manual

33. SErVICE MoDE

the system comes equipped with Service mode allowing to carry out system maintenance tasks, such as detection device replacement,
tamper switch installation, wireless device battery replacement without causing zone or tamper alarm when Service mode is activated. to
activate/deactivate Service mode, please refer to the following configuration methods:
activate Service
mode
Deactivate Service
mode
notE:
Alternatively, the Service mode automatically deactivates when 1-hour timeout period expires or after arming the system.

34. rEMotE SYStEM rEStart

In some critical situations, a system restart may be required. to remotely carry out system restart, please refer to the following configura-
tion method.
restart the system
170 170 EN
SMS text message content:
ssss_SeRVICeMODe:ON
SMS
Value: ssss - 4-digit SMS password.
Example: 1111_SERVICEMODE:ON
Menu path:
OK → iiii → OK → SeRVICe MODe → OK → eNABLe → OK
EKB2
Value: iiii – 4-digit installer code.
Enter parameter 67 and parameter status value:
EKB3/
67 1 #
EKB3W/
EWKB4
Example: 671#
ElDES
Config-
this operation may be carried out from the PC using the ELDES Configuration software.
uration
software
SMS text message content:
ssss_SeRVICeMODe:OFF
SMS
Value: ssss - 4-digit SMS password.
Example: 1111_SERVICEMODE:OFF
Menu path:
EKB2 OK → iiii → OK → SeRVICe MODe → OK → DISABLe → OK
Value: iiii – 4-digit installer code.
Enter parameter 67 and parameter status value:
EKB3/
67 0 #
EKB3W/
EWKB4
Example: 670#
ElDES
Config-
this operation may be carried out from the PC using the ELDES Configuration software.
uration
software
SMS text message content:
ssss_ReSet
SMS
Value: ssss – 4-digit SMS password.
Example: 1111_RESET
ESIM384 Installation and Configuration Manual v1.1