Indication By Ews2 - Wireless Outdoor Siren Indicators - Eldes ESIM384 Installation Manual

20.4. Indication by EWS2 - Wireless outdoor Siren Indicators

When enabled, the built-in LeD indicators of eWS2 wireless outdoor siren will flash during the alarm. to enable/disable this feature, please
refer to the following configuration methods.
Enable EWS2 lED
indication
Disable EWS2 lED
indication
ESIM384 Installation and Configuration Manual v1.1
Menu path:
OK → iiii → OK → PRIMARY Sett INGS → OK → SIReN SettINGS → OK → eWS2 LeD → OK →
EKB2
eNABLe → OK
Value: iiii – 4-digit installer code.
Enter parameter 88 and parameter status value:
EKB3/
88 1 #
EKB3W/
EWKB4
Example: 881#
ElDES
Config-
this operation may be carried out from the PC using the ELDES Configuration software.
uration
software
Menu path:
OK → iiii → OK → PRIMARY Sett INGS → OK → SIReN SettINGS → OK → eWS2 LeD → OK →
EKB2
DISABLe → OK
Value: iiii – 4-digit installer code.
Enter parameter 88 and parameter status value:
EKB3/
88 0 #
EKB3W/
EWKB4
Example: 880#
ElDES
Config-
this operation may be carried out from the PC using the ELDES Configuration software.
uration
software
103
EN 103