Entering Values - Siemens SIMATIC HMI OP3 Equipment Manual

General Operation
3.2

Entering Values

General procedure In input fields, values can be entered on the OP3 and transferred to the PLC.
1. Branch, as described in section 4.3, initially to the screen you require and
2. Using the arrow keys, select the input field you require within the screen
3. Then enter your value. Depending on how the field has been configured,
4. Confirm your input with ENTER.
5. Exit the screen entry by pressing ESCAPE.
3-4
then to the corresponding screen entry.
entry.
values may be input as
numerical values (refer to section 3.2.1),
alphanumeric values (refer to section 3.2.2),
symbolic values (refer to section 3.2.3).
You can cancel any incorrect input by pressing ESCAPE. The original
value is then automatically reinserted in the field. Then enter the correct
value.
Operator Panel OP3
Edition 11/99