Centrecom FS980M/9 Command Reference Manual page 72

F C M
ILE AND ONFIGURATION ANAGEMENT
Similarly, you can specify the USB storage device base directory with usb or usb:
or usb:/
You cannot name a directory or subdirectory flash, nvs, usb, card, tftp, scp, sftp
or http. These keywords are reserved for tab completion when using various file
commands.
In a stacked environment you can only access flash and nvs using the stack
member filepath (e.g. dir awplus-2/flash:/). To access a USB storage
device on a backup stack member, use the
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
613-50137-01 Rev A
C
OMMANDS
"autoboot enable" on page 74
"boot config-file" on page 75
"boot config-file backup" on page 77
"boot system" on page 78
"boot system backup" on page 80
"cd" on page 81
"copy (filename)" on page 82
"copy current-software" on page 84
"copy debug" on page 85
"copy running-config" on page 86
"copy startup-config" on page 87
"copy zmodem" on page 88
"create autoboot" on page 89
"delete" on page 90
"delete debug" on page 91
"dir" on page 92
"edit" on page 94
"edit (filename)" on page 95
"erase startup-config" on page 96
"ip tftp source-interface" on page 97
"ipv6 tftp source-interface" on page 98
"mkdir" on page 99
"move" on page 100
"move debug" on page 101
"pwd" on page 102
"rmdir" on page 103
"show autoboot" on page 104
"show boot" on page 105
Command Reference for FS980M Series
AlliedWare Plus™ Operating System - Version 5.4.6-2.x
remote-login command.
72