Csdh, Show Text Mode Parameters - Fibocom G510 User Manual

OK
AT+CMGR=6
+CMGR: "STO UNSENT","15820447141","",129,17,0,0,167,"+8613800755500",145,3
ABC
OK

7.1.6 +CSDH, Show Text Mode Parameters

This command controls whether detailed header information is shown in text mode result codes.
Command Syntax
Set +CSDH=[<show>
]
Read AT+CSDH?
Test AT+CSDH=?
The following table shows the +CSDH parameters.
<Parameter> Description
<show> 0 - Means do not show header values defined in commands +CSCA and +CSMP
(<sca>, <tosca>, <fo>, <vp>, <pid> and <dcs>) nor <length>, <toda> or <tooa> in
+CMT, +CMGL, +CMGR result codes for SMS- DELIVERs and SMS-SUBMITs in text
mode; for SMS-COMMANDs in +CMGR result code, do not show <pid>,<mn>, <da>,
<toda>, <length> or <cdata> (default).
1 - Means show the values in result codes.
Example:
AT+CSDH=?
+CSDH: (0-1)
OK
AT+CSDH?
+CSDH: 0
G5/G6-Family AT Commands User Manual
Response/Action
OK
or:
+CMS ERROR: <err>
+CSDH: (<show>)
OK
+CSDH: (list of supported
<show>s)
OK
Remarks
The set command controls whether
detailed header information is shown
in text mode result codes.
The read command returns the
current <show> parameter value.
Page 91 of 243