Cpbr, Read Phone Book Entries - Fibocom G510 User Manual

<used>
<total>
<pin2>
Example:
AT+CPBS="SM"
OK
AT+CPBR=?
+CPBS: ("SM","FD","LD","ON")
OK
AT+CPBR=1
OK
AT+CPBR=1,3 //There is nothing written in entry 1,2,3
OK
AT+CPBS="FD","<correct pin2>"
OK // +CPBW pin2 unlocked
AT+CPBW=1,"034546565",129,"xyz"// Write into FD storage
OK
AT+CPBS="FD","<wrong pin2>"
+CME ERROR: incorrect password
AT+CPBS="FD","<pin2 longer then 8 chars>"
+CME ERROR: text string too long

6.1.3 +CPBR, Read Phone Book Entries

This command recalls phone book entries from a specific entry number or from a range of entries. If only
one entry is specified, and that entry is empty, OK is returned. If a range of entries is requested, all entries
that contain data within that range are returned. If a listing fails in a Module error, +CME ERROR: <err> is
G5/G6-Family AT Commands User Manual
FD: SIM Fixed dialing phone book.
ON: Own numbers (MSISDNs) list (reading this storage is also available
through +CNUM).
SM: SIM phone book.
LD: SIM last-dialing phone book
The default phone book is SM.
Integer type value indicating the number of used locations in the selected
memory.
Integer type value indicating the total number of entries in the selected
phone book memory.
String type. PIN2 password 4 - 8 digits.
Page 76 of 243