Mgauth, Set Type Of Authentication - Fibocom G510 User Manual

OK
AT+MIPCALL=1,"internet","User1 ","Pswd",2
OK
AT+MIPCALL?
+MIPCALL: 2
OK
+MIPCALL: 123.145.167.230

13.1.2+MGAUTH, Set type of authentication

This proprietary command allows to enter the type of authentication for a user -name (using a password)
for the specified PDP context.This command is used for internal protocol.
Command
Set
Test
The following table shows the +MGAUTH parameters.
<Parameter> Description
cid Digit string which specifies a particular PDP context definition (See "+CGDCONT,
Define PDP Context").
auth Set type of authentication
0
1
2
name User name in provider server (in quotation marks). Contact your service provider for
details.
pwd Password for provider server (in quotation marks). Contact your service provider for
details.
AT Commands User Manual
Syntax
+MGAUTH=<cid>,<auth>,<name>,<pw
d>
+MGAUTH=?
Don,t need authentic
PAP
CHAP
Response/Action
OK
or:
ERROR: <err>
+MGAUTH: (list of supported
<cid>s),( list of supported
<auth>s),(max length of <name>),
max length of <pwd>
Page 201 of 243