7 SMS
7.1 SMS Commands
Module supports SMS PDU and SMS TEXT mode according to ETSI specifications 07.05 & 3.40.
7.1.1 +CPMS, Preferred Message Storage
This command handles the selection of the preferred message storage area. The message storage area
is divided into three parts, mem1, mem2 and mem3.
Command
Set
Read
Test
G5/G6-Family AT Commands User Manual
Syntax
Response/Action
+CPMS=<me
+CPMS:
m1>[,<mem2
<used1>,<total1>,<used2>,<total2>,
>[,<mem3>]]
<used3>,<total3>
OK
or:
+CMS ERROR: <err>
+CPMS?
+CPMS:
<mem1>,<used1>,<total1>,<mem2
>,<used2>,<total2>,<mem3>,<used
3>,<total3>
OK
or:
+CMS ERROR: <err>
+CPMS=?
+CPMS: (list of
supported<mem1>s),(list of
supported <mem2>s),(list of
supported <mem3>s)
OK
or:
+CMS ERROR: <err>
Remarks
The Set command
sets the memory
storage.
The Read command
displays the selected
memory storage type
for the three memory
areas.
The Test command
lists the supported
memory storage for
<mem1>, <mem2>
and <mem3>.
Page 83 of 243