Call Status Messages; Cpas, Phone Activity Status - Fibocom G510 User Manual

<call_id>
Example:
AT+MHUP=?
+MHUP: (1,16,17,18,27,31),(0-7)
OK
AT+MHUP = 16,3
OK
AT+MHUP = 17
OK
AT+MHUP = 17,0
OK

5.2 Call Status Messages

5.2.1 +CPAS, Phone Activity Status

This command displays the current activity status of the Module; for example, call in progress, or ringing.
Command
Execute/Read
Test
G5/G6-Family AT Commands User Manual
16 "Normal call clearing"
17 "User busy"
18 "No user responding"
27 "Destination out of order"
31 "Normal, unspecified"
Index of the call id (same as <idx> in +CLCC command)
0 All calls (default).
1-7 Specific call id.
//Hung up call #3, and send cause "Normal call clearing"
//Hung up all calls, and send cause "User busy"
//Hung up all calls, and send cause "User busy"
Syntax Response/Action
AT+CPAS +CPAS: <pas>
OK
or:
+CME ERROR: <err>
AT+CPAS +CPAS: (list of
=? supported <pas>s)
OK
Remarks
The Execute and Read commands
return the activity status <pas> of the
Module. They can be used to
interrogate the Module.
Page 61 of 243