At Commands Structure; General Symbols Used In At Commands Description; Command Structure - Fibocom G510 User Manual

2.4 AT Commands Structure

2.4.1 General Symbols Used in AT Commands Description

The following syntax definitions apply in this chapter:
Syntax
<CR>
<LF>
<...>
[...]
//

2.4.2 Command Structure

Each AT command has the "AT" or "at" prefix string (except the commands A/ and +++).
Each AT command has the suffix <CR> (except the commands A/ and +++).
G5/G6-Family AT Commands User Manual
TE
Command
TE
Figure 2-1 Unsolicited results code
Definition
Carriage returns character, specified by the value of the S3-register.
Line-feed character, specified by the value of the S4-register.
Name enclosed in angle brackets is a syntax element. The brackets themselves
do not appear in the command line.
Optional sub-parameter of a command or an optional part of terminal
information response, enclosed in square brackets. The brackets themselves
do not appear in the command line. When the sub-parameter is not provided in
the parameter type commands, the new value equals its previous value. In
action type commands, the action should be performed on the basis of the
recommended default setting of the sub-parameter.
Denotes a comment, and should not be included in the command.
TA (G5xx/G6xx)
Results code
TA (G5xx/G6xx)
Page 13 of 243