Chup, Hang Up Call - Fibocom G510 User Manual

5.1.15 +CHUP, Hang up Call

This command causes the Module to hang up the current GSM call.
Command
Set
5.1.16 +MDC, Selection of Desired Message to Be Displayed Upon
Connection of a Voice Call
This AT command enables you to select the desired messages to be displayed upon connection of a voice
call with a remote party. The OK and CONNECT messages are available.
Command
Set
Read
Test
Example:
G5/G6-Family AT Commands User Manual
Syntax Response/Action
+CHUP OK
or:
+CME ERROR
<err>
Syntax Response/Action
+MDC=< OK
mode>
or:
+CME ERROR:
<err>
+MDC? +MDC: <mode>
OK
+MDC=? +MDC: (list of
supported
<mode>s)
OK
Remarks
The Set command hangs up the current
GSM call.
Remarks
The Set command selects which of the
supported messages will be displayed upon
connection of a voice call.
<mode> Command Parameters:
0 - Display OK on voice call connection
1 - Display CONNECT on voice call
connection
Default Values:
Power Up - As previously saved in NVM
FLEX bit
0 - Before Set command is first used
The Read command should return the
current selection of <mode>.
The Test command returns the possible
<mode> values.
Page 59 of 243