Mcell, Module Cell Description - Fibocom G510 User Manual

9.1.6

+MCELL, Module Cell Description

This command displays information about the Cellular Network. The information is divided throughout 21
screens, each of them with different parameters data.
Command
Set
Read
Test
The following table shows the +MCELL parameters.
<Parameter>
<mode>
<screen_num>
G5/G6-Family AT Commands User Manual
Syntax Response/Action
+MCELL=<mo OK
de>,
<screen_num>
or:
+CME ERROR: <err>
+MCELL? OK
+MCELL=? +MCELL: (list of
supported <mode>s),
(list of supported
<screen_num>s)
OK
Description
0 One shot requested.
The requested screen number - An integer number.
1 Serving Idle Information screen
2 Circuit Switched Serving Cell Information screen
3 Miscellaneous Information screen
4 Uplink Data Transfer screen
5 Downlink Data Transfer screen
6 Neighbor 1 Cell Information screen
7 Neighbor 2 Cell Information screen
8 Neighbor 3 Cell Information screen
Remarks
The Set command will return "OK"
only. The relevant <screen_info>
will return back with +MCELL
format few seconds later.
The Read command just returns
OK and does nothing.
The Test command returns the
possible <mode> & <screen_num>
values.
Page 139 of 243