Msmpd, Enable/Disable Sim Card Hot Plug - Fibocom G510 User Manual

10.1.14 +MSMPD, Enable/Disable SIM Card Hot Plug

This command can Enable/Disable SIM card hot plug feature. The default status is disable this feature.
The parameter will be saved in profile and can restore at power cycle.
Command
Set
Read
Test
The following table shows the +MSMPD parameters.
<Parameter>
<status>
Notes: This feature need HW support.
Example:
AT+MSMPD=?
+MSMPD: (0-1)
OK
AT+MSMPD=1
OK
AT+ MSMPD?
+MSMPD: 1
OK
G5/G6-Family AT Commands User Manual
Syntax
AT+MSMPD=< status>
AT+MSMPD?
AT+MSMPD=?
Description
0: Disable the SIM card hot plug feature
1: Enable the SIM card hot plug feature
The default value is 0
Response/Action
OK
Or:
+CME ERROR: <err>
+MSMPD: <status>
OK
+MSMPD: (0-1)
OK
Remarks
Enable/Disable SIM
card hot plug
Read the current
status
Page 169 of 243