Cpol, Preferred Operators - Fibocom G510 User Manual

AT+COPS?
+COPS: 0,2,"46000"
OK
AT+COPS=2
OK
AT+CREG=2
OK
AT+COPS=1,2,"46001"
ERROR
+CREG: 3
AT+COPS=4,2,"46001"
+CREG: 3
+CREG: 2
+CREG: 1,"27A0","0DEB"
OK
AT+COPS?
+COPS: 0,2,"46000"
OK

9.1.5 +CPOL, Preferred Operators

This command is used to edit the PLMN selector lists in the SIM card or active application in the UICC
(GSM or USIM).
If no list has been previously selected, the EFPLMNwAcT - user controlled PLMN selector with Access
Technology list, is the one accessed by default.
Command Syntax
Set AT+CPOL=[<ind
ex>][,<format>[,<
oper>]]
Read AT+CPOL?
G5/G6-Family AT Commands User Manual
//Specific provider number
Response/Action
OK
or:
+CME ERROR: <err>
+CPOL:
<index1>,<format>,<oper
1>[<CR><LF>
+CPOL:
Remarks
Note: In case the index already exists
in the list, the new entry will erase the
old one and replace it in the list.
The Module may also update this list
automatically when new networks are
selected.
Page 136 of 243