The following table shows the V parameters.
<Parameter>
<value>
Example:
ATV0
0
ATV1
OK
4.1.2 Q, Result Code Suppression
This command determines whether to output the result codes. Information text transmitted in response to
commands is not affected by the setting of this parameter.
Command
Set
Read
The following table shows the parameters.
<Parameter>
<value>
G5/G6-Family AT Commands User Manual
or:
+CME ERROR: <err>
Description
0
Transmits limited headers and trailers, and numeric text.
1
Transmits full headers and trailers, and verbose response text.
The default value is 1.
Syntax
Response/Action
ATQ<value>
OK
or:
+CME ERROR: <err>
ATQ?
Q: <value>
OK
Description
0
Transmit result codes.
1
Suppress result codes.
The default value is 0.
of information responses and result
codes.
Remarks
The set commands sets whether or
not to output result codes.
Page 23 of 243