Mavol, Volume Setting - Fibocom G510 User Manual

11.2.10+MAVOL, Volume Setting

This command enables you to determine a volume level for a particular feature via a particular accessory.
The gain levels are saved in flex. Therefore, upon power up, the path active (mic, speaker and alert
speaker) will have these saved gain levels.
Note: The SMS MT volume is adjusted using the +MAVOL command with type "ring". The RING value is
related to the SMS alert, the MT call, and so on.
Command Syntax
Set +MAVOL=<accy>,
<feature>,<vol>
Read +MAVOL?
Test +MAVOL=?
The following table shows the +MAVOL parameters.
<Parameter>
<accy>
(1-3)
G5/G6-Family AT Commands User Manual
Response/Action
OK
or:
+CME ERROR: <err>
(Current path volume)
+MAVOL:
<accy>,<feature1>,vol>
+MAVOL:
<accy>,<feature2>,vol>
+MAVOL:
<accy>,<feature4>,vol>
+MAVOL:
<accy>,<feature8>,vol>
OK
+MAVOL: (supported
accessories),(supported
features
combinations),(supported
volume levels)
Description
st
1 1 channel SPK+/SPK-
2 2 nd channel AUXO+/AUXO-
Remarks
The Set command sets the
volume level <n> to a
certain<feature> through a certain
<accy>.
The Read command returns the
volume level of all the features in
the current active accessories.
Test command returns the
supported range of volume levels,
accessories and features.
Page 181 of 243