Mjdc Jamming Detection - Fibocom G510 User Manual

The following table shows the +CA parameters.
<Parameter>
<Cell allocation 1>,<Cell
2>,<Cell allocation 3>
Example:
AT+MCI=1
OK
+MCI: 58,48,-71, ,72,29,-70,522,47,-76,84,24,-77,68,42,-81,88,17,-82,86,42,-85
+CA: 7,12,29,37,41,44,47,58,73

9.1.11 +MJDC Jamming Detection

Detect the jamming.
Command
Set
Read
Test
The following table shows the +MJDC parameters.
<Parameter>
<mode>
G5/G6-Family AT Commands User Manual
Description
allocation Absolute Radio Frequency Channel Number
Range: [1-124], [128-251], [512-885], [975-1023].
// Get the current serving and neighbor info.
Syntax Response/Action
+MJDC=<mod OK
e> or:
+CME ERROR: <err>
+MJDC? +MJDC:
<mode>[,<jamming>]
OK
+MJDC=? +MJDC: (list of
supported <mode>s)
OK
Description
0 don't detect the jamming
1 detect the jamming
Remarks
The Set command controls the
presentation of an unsolicited
result code "+MJDC: " and the
result of the Read operation.
The read command returns the
current <mode> parameter value
and detect result.
Only <mode> is 1,the <jamming>
will show .
The Test command returns the
possible <mode>.
Page 146 of 243