Mipntp, Synchronize The Local Time Via Ntp - Fibocom G510 User Manual

13.1.21 +MIPNTP, Synchronize the local time via NTP

This command causes the Module to synchronize the local time from the NTP time server.
Command
Set
Read
Test
The following table shows the +MIPNTP parameters.
<Parameter>
Remote_IP
Remote_Port
Result
Example:
at+mipntp="202.120.2.101",123
OK
+MIPNTP: 1
at+cclk?
+CCLK: "13/09/27, 05:28:48 +00"
OK
AT Commands User Manual
Syntax
+ MIPNTP=<Remote_IP>,
<Remote_Port>
+MIPNTP?
+MIPNTP=?
Description
The address of the NTP time server which could be a dotted decimal IP or a
domain name.
The port of the NTP time server.
1:Successfully synchronize the local time;
0: Fail to synchronize to local time.
Response/Action
OK
+MIPNTP: <Result>
or:
ERROR: <err>
+MIPNTP:
<Remote_IP>,<Remote_Port>
+MIPNTP((list of supported<"Remote_IP">s),
list of supported<Remote_Port>s)
Page 229 of 243