Crsm, Restricted Sim Access - Fibocom G510 User Manual

effect.
Command
Set
The following table shows the &W parameters.
<Parameter>
<n>
Example:
AT&W0
OK

4.1.10+CRSM, Restricted SIM Access

This command provides limited access to the Elementary Files on the SIM. Access to the SIM database is
restricted to the commands which are listed at <command>. All parameters of AT+CRSM are used as
specified by GSM 11.11 version 8.7.0. As response to the command, the Module sends the actual SIM
information parameters and response data. Error result code "+CME ERROR" may be returned if the
command cannot be transferred to the SIM, e.g. if the SIM is not inserted, or defected, or PIN1/PUK
authentication required, or required input parameters not present. However, failure in the execution of the
command in the SIM is reported in <sw1> and <sw2> parameters.
Some AT+CRSM commands require PIN/PIN2 authentication.
Command Syntax
Set AT+CRSM=<comman
d>[,<file_id>[,<P1>,<
P2>,<P3>[,<data>]]]
G5/G6-Family AT Commands User Manual
Syntax Response/Action Remarks
&W[<n>] OK
or:
+CME ERROR:
<err>
Description
profile number:
0 Store to user's profile 0
Response/Action
+CRSM:
<sw1>,<sw2>[,<response
>]
OK
or:
+CME ERROR: <err>
Set command stores the current active
configuration to user profile 0.
Remarks
Set command transmits the SIM
<command> and its required
parameters to the ME. ME sends
the actual SIM information
parameters and response data.
Page 29 of 243