Cusd, Unstructured Supplementary Service Data - Fibocom G510 User Manual

Example:
AT+CSSN=? // test command
+CSSN: (0-1),(0-1)
OK
AT+CSSN=0,0 // disable both options
OK
AT+CSSN=1,0 // set n value as enabled, m disabled
OK
AT+CSSN?
+CSSN: 1,0
OK
+CSSI: 1
+CSSU: 2
AT command and m enable

5.3.2 +CUSD, Unstructured Supplementary Service Data

This command allows control of Unstructured Supplementary Service Data (US SD), according to GSM
02.90.
Both network and mobile initiated operations are supported. Parameter <n> is used to disable/enable the
presentation of an unsolicited result code (USSD response from the network, or network initiated
operation) +CUSD: <m>[,<str>,<dcs>] to the TE. In addition, value <n>=2 is used to cancel an ongoing
USSD session. When <str> is given, a mobile initiated USSD-string or a response USSD-string to a
network initiated operation is sent to the network. The response USSD-string from the network is returned
in a subsequent unsolicited +CUSD result code.
Command
Set
Unsolicited
Report
Read
G5/G6-Family AT Commands User Manual
// display the current n & m values
// displayed after mobile originated call setup of call forward and n enable
//displayed when a call has been placed on hold (during the call) using the +CHLD
Syntax Response/Action
AT+CUSD= OK
[<n>[,<str>[,
or:
<dcs>]]]
+CME ERROR: <err>
+CUSD:
<m>[,<str>[,<dsc>]]]
+CUSD? +CUSD: <n>
OK
Remarks
The Set command
enables/disables the display of
the unsolicited result code.
The USSD response from the
network.
The Read command displays
the current value of <n>.
Page 68 of 243