Mipflush, Flush Data From Buffers - Fibocom G510 User Manual

The following table shows the +MIPPUSH parameters.
<Parameter>
Socket_ID
Destination_IP
Destination_Port
Example:
AT+MIPPUSH=1
using the +MIPOPEN command)
+MIPPUSH: 1,0
OK

13.1.8+MIPFLUSH, Flush Data from Buffers

This command causes the Module to flush (delete) data accumulated in its accumulating buffers.
Command
Set
Read
Test
The following table shows the +MIPFLUSH parameters.
<Parameter>
Socket_ID
Example:
AT Commands User Manual
Description
1,2,3,4Number of valid socket
IP of destination site in the format AAA.BBB.CCC.DDD. The value can be written
in1, 2 or 3 digits.
0-65535Port of destination site. Written in decimal digits.
//Terminal asks the Module to flush the buffer in socket 1 (was opened
Syntax
+MIPFLUSH = <Socket_ID>
+MIPFLUSH?
+MIPFLUSH=?
Description
1,2,3,4 - Number of valid sockets
Response/Action
+MIPFLUSH: <Socket_ID>
OK
or:
ERROR
+MIPFLUSH: [<socket_ID>]
OK
+MIPFLUSH=(<Socket_ID>)
OK
Page 211 of 243